Dana 35 Standard Cut

Dana 35 standard cut axles have a 7.560" ring gear that bolts to the carrier with (8) 7/16" – 20 bolts. The pinion has a 1.463" diameter shaft with 26 splines. This axle can be visually identified by its 10 cover bolts. The carriers available support 3.31 and numerically lower ratios and 3.55 and numerically higher ratios. This axle is sometimes referred to as an AMC 35 and was used in front and rear applications. Front applications were an IFS configuration and rear applications were a solid (beam) axle.

The Dana 35 standard cut was commonly found on the following vehicles: 1968 - 1970 AMX, rear1984 - 2001 Cherokee XJ Sport, rear1984 - 2001 Cherokee XJ, rear1986 - 1992 Comanche, rear1978 - 1983 Concord, rear1997 - 1999 Dakota, front1997 - 1999 Durango, front1979 - 1987 Eagle, rear2001 - 2010 Explorer Sport Trac, front1996 - 2005 Explorer, front1992 - 1998 Grand Cherokee , rear1993 - 1993 Grand Wagoneer, rear1970 - 1977 Hornet, rear1967 - 1974 Javelin, rear1975 - 1980 Pacer, rear1998 - 2007 Ranger, front1997 - 2006 Wrangler TJ non-Rubicon, rear1987 - 1995 Wrangler YJ, rear