Home » Archive

Articles in the Dana 44 Category

Dana 44 »

[24 Jan 2014 | No Comment | ]
Dana 44 Pinion Yoke

Dana 44 yoke, outside lock up at 3.625″, bearing caps are 1.063″.

Dana 44 »

[24 Jan 2014 | No Comment | ]
Ford Dana 44 IFS Outer Stub Shaft Slip On Locking Hub

Ford Dana 44 IFS outer stub shaft, this fits the trucks that the hub slips on the studs on the rotor, this will not fit a normal hub set up because it is to short. Over all length is 9.25″ and from the middle of the u joint to the end of the shaft is about 8.5″. This shaft fits Ford only and most of the trucks were made in the 80′s. It’s 19 spline.

Dana 44 »

[24 Jan 2014 | No Comment | ]
NEW OEM SPICER DANA 44 CARRIER 3.92 & UP WITH GASKET RING GEAR BOLTS & SHIMES

OEM. Dana Spicer Dana 44 Open Style Carrier Case 3.92 4.10 4.30 4.56 4.88 5.13 5.38 and Up Ratios.THIS IS NOT A POSI CARRIER CASE. THIS CARRIER CAN BE USED TO PUT A LOCK-RIGHT OR SPARTAN STYLE LOCKER IN IT. This carrier can be used in any standard Dana 44 front or rear for 3.92 and up ratios (slower ratios). This carrier is for Dana 44 axle that have 30 splline axle shafts which are found in most all axle after 1970. Standard Cut Rotation or Reveres cut Specifications Ring …

Dana 44 »

[24 Jan 2014 | No Comment | ]
Auburn Gear Inc Differential Auburn Limited Slip 30-Spline Dana 44 10-Bolt Each

Aftermarket Carrier Style Limited slip Axle Shaft Spline Quantity 30 Carrier Material Ductile iron Cover Bolts 10 Manufacturer of Axle Dana Notes For use with 3.92 gear ratio and up. Quantity Sold individually. This product ships directly from the manufacturer. Summit Racing Part Number: AUB-542082

Dana 44 »

[24 Jan 2014 | No Comment | ]
C4 Corvette Dana 44 Rear Differential 3.45 Ratio 84-96 Low Miles

Up for bid, Dana 44 rear differential removed from 94 corvette 6speed. 52k miles, 3.45 gear ratio, good working condition, great upgrade for Dana 36 equipped cars.

Dana 44 »

[24 Jan 2014 | No Comment | ]
DANA 44 1310 SERIES PINION YOKE

Dana 44 1310 series pinion yoke that was removed from a 1979 Ford Bronco.

Dana 44 »

[24 Jan 2014 | No Comment | ]
Eaton Detroit Locker Dana 44 187SL-16C

Brand:Detroit LockerManufacturer’s Part Number:187SL16CPart Type:Differential CarriersProduct Line:Eaton Detroit LockersSummit Racing Part Number:DTL-187SL16C Aftermarket Carrier Style:Detroit lockerCover Bolts:10Axle Shaft Spline Quantity:30Manufacturer of Axle:DanaCarrier Material:SteelQuantity:Sold individually. Notes:Recommended for 3.92 ratio ring gear and numerically higher. Will not fit models with C-clip axles. These Eaton Detroit Lockers are designed to maximize traction by delivering 100 percent of the torque and power to both drive wheels. They are engineered to keep both wheels in a constant drive mode and have the ability to automatically allow wheel speed differentiation when required.

Dana 44 »

[23 Jan 2014 | No Comment | ]
“NEW” DANA SPICER OE STEEL DIFFERENTIAL COVER DANA 44 COVER RUBICON JEEP

NEW SPICER DANA 44 COVER AND BOLTS, PART NUMBER 708175, FOR 2007-11 JEEP WRANGLER RUBICON AND WRANGLER, UNLIMITED JK RUBICON WITH MODEL 44 REAR AXLE

Dana 44 »

[23 Jan 2014 | No Comment | ]
Dana 44 Ez Locker 30 Spline

Dana 44 EZ locker 30 spline. New in the box. Never installed. All parts included. Customer ordered and never picked up.

Dana 44 »

[23 Jan 2014 | No Comment | ]
Scout II Tera Traveler Alloy USA Rear Axle Dana 44 30 Spline 28.25″ 21117C

? Spline diameter 1-5/16 30 spline ? Rear left or right side placement ? 28-1/4 inch length ? 5 lug on 5-1/2 inch bolt circle ? fits 1972 80 Scout II Scout Tera and Traveller ? combined shipping Alloy usa axles are heat-treated twice and induction hardened to produce these heavy-duty axles that are up to 35% stronger than stock 1040 axles. Alloy USA uses the latest cold spline rolling technology, to produce splines that are stronger than traditional cut splines. Our shafts are covered by an exclusive 10-year warranty!